Applications
For clean water containing solids up to 10 mm grain size.
For draining rooms or or emptying tanks.
Extraction of water from ponds, streams or pits and for rainwater collection.
For irrigation purposes.
For outdoor use a power supply cable of not less than 10 m should be used in accordance with: EN 60 335-2-41.

Operating conditions
Liquid temperature up to 50° C.
Maximum immersion depth: 5 m.
Minimum water level with float: 70 mm.
Minimum water level manual operation: 15 mm.
Continuous duty.

Motor
2-pole induction motor, 50 Hz (n = 2900 rpm).
DPR: three-phase 230 V ± 10%; three-phase 400 V ± 10%. Cable 5 m, without plug.
DPRM: single-phase 230 V, with float switch and thermal protector.
Incorporated capacitor. Cable 5 m, with plug CEI-UNEL 47166.
Insulation class F. Protection IP 68 (for continuous immersion)
Double impregnation humidity-proof dry winding.
Constructed in accordance with: EN 60335-2-41.

50 Hz catalogue

The post DPR 10 appeared first on Subteck.

Applications
Suitable for pumping waste water containing long filamentous, paper and textile materials and organics.
They are particularly suitable for use in domestic, residential and industrial installations.
Solid passage 6 mm.

Operating conditions
Liquid temperature up to 35° C.
Maximum immersion depth: 5 m.
Minimum immersion depth: 275 mm.
Continuous duty (with submerged motor).

Motor
2-pole induction motor, 50 Hz (n = 2900 rpm).
DMG: three-phase 230 V ± 10%; three-phase 400 V ± 10%;.
DMGM: single-phase 230 V ± 10%, with float switch and and control box with
thermal protection and starting capacitors.
Cable: H07RN8-F, 4G1 mm2 (4G1,5 mm2 for GMGM 6-25), length 10 m.
Insulation class F. Protection IP 68 (for continuous immersion)
Triple impregnation humidity-proof dry winding.
Constructed in accordance with: EN 60034-1; EN 60335-1, EN 60335-2-41.

50 Hz catalogue

The post DMG appeared first on Subteck.

Construction:
Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.
DIV: with free-flow (vortex) impeller.
Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.

Applications:
For clean and dirty water, also containing solids up to 35 mm grain size.
The DIV free-flow impeller construction is particularly suitable for liquids with a high solid content or with filamentous particles.
This construction (with smooth surfaces in rolled-stainless steel and easy access for cleaning) is also suitable for certain uses in the food industry.

Operating conditions:
Liquid temperature up to 35° C.
Maximum immersion depth: 5 m.
Minimum immersion depth: 248 mm.
Continuous duty (with submerged motor).

Motor:
2-pole induction motor, 50 Hz (n = 2900 rpm).
DIV: three-phase 230 V ± 10%; three-phase 400 V ± 10%;.
Cable: H07RN-F, 4G1 mm2, length 10 m, without plug.
DIVM: single-phase 230 V ± 10%, with float switch and thermal protector.
Incorporated capacitor.
Cable: H07RN-F, 3G1 mm2, length 10 m, with plug CEI-UNEL 47166.
Insulation class F. Protection IP 68 (for continuous immersion)
Triple impregnation humidity-proof dry winding.
Constructed in accordance with: EN 60034-1; EN 60335-1, EN 60335-2-41.

50 Hz catalogue

The post DIV 35 appeared first on Subteck.

Applications:
For domestic or industrial waste water, dirty water with solids up to 45 mm grain size, for liquids which are compatible with the pump materials.

Operating conditions:
Liquid temperature up to 35 °C.
pH value: 6-11.
Maximum immersion depth: 10 m (with suitable cable length).
Continuous duty (with submerged motor).

Motor:
2-pole induction motor, 50 Hz (n = 2900 rpm).
DGC:
three-phase 230 V ± 10%; three-phase 400 V ± 10%;
2 built-in thermal protectors to be connected to a control box.
Cable: 4G1,5 mm2+ 2×0,5 mm2, length 10 m.
DGCM:
single-phase 230 V, with float switch,
built-in thermal protector and built-in capacitor.
Cable: H07RN8-F, 3G1,5 mm2, length 10 m, with plug (CEI – UNEL 47166).
Insulation class F. Protection IP 68.
Triple impregnation, humidity-proof winding.
Constructed in accordance with: EN 60335-2-41.

50 Hz catalogue

The post DGC 45 appeared first on Subteck.

Applications:
For domestic or industrial waste water, dirty water with solids up to 50 mm, for liquids which are compatible with the pump materials.

Operating conditions:
Liquid temperature up to 35 °C.
pH value: 6-11.
Maximum immersion depth: 10 m (with suitable cable length).
Continuous duty (with submerged motor).

Motor:
2-pole induction motor, 50 Hz (n = 2900 rpm).
DGV:
three-phase 230 V ± 10%; three-phase 400 V ± 10%;
2 built-in thermal protectors to be connected to a control box.
Cable: 4G1,5 mm2+ 2×0,5 mm2, length 10 m.
DGVM: single-phase 230 V, with float switch,
built-in thermal protector and built-in capacitor.
Cable: H07RN8-F, 3G1,5 mm2, length 10 m, with plug (CEI – UNEL 47166).
Insulation class F. Protection IP 68.
Triple impregnation, humidity-proof winding.
Constructed in accordance with: EN 60335-2-41.

50 Hz catalogue

The post DGV 50 appeared first on Subteck.

Applications:
For domestic or industrial waste water, dirty water with solids up to 50 mm grain
size, for liquids which are compatible with the pump materials.
For draining rooms or or emptying tanks.
Extraction of water from ponds, streams or pits and for rainwater collection.

Operating conditions:
Liquid temperature up to 35° C.
pH value: 6-11.
Maximum immersion depth: 5 m.
Minimum immersion depth: 260 mm.
Continuous duty (with submerged motor).

Motor:
2-pole induction motor, 50 Hz (n = 2900 rpm).
DMV:
three-phase 230 V ± 10%; three-phase 400 V ± 10%;.
Cable: H07RN-F, 4G1 mm2, length 10 m, without plug.
DMVM:
single-phase 230 V ± 10%, with float switch and thermal protector.
Incorporated capacitor.
Cable: H07RN-F, 3G1 mm2, length 10 m, with plug CEI-UNEL 47166.
Insulation class F. Protection IP 68 (for continuous immersion)
Triple impregnation humidity-proof dry winding.
Constructed in accordance with: EN 60034-1; EN 60335-1, EN 60335-2-41.

50 Hz catalogue

The post DMV 50 appeared first on Subteck.

Applications:
For clean water containing solids up to 10 mm grain size.
For draining rooms or or emptying tanks.
Extraction of water from ponds, streams or pits and for rainwater collection.
For irrigation purposes.
For outdoor use a power supply cable of not less than 10 m should be used in accordance with: EN 60 335-2-41.

Operating conditions:
Liquid temperature up to 50° C.
Maximum immersion depth: 5 m.
Minimum water level with float: 70 mm.
Minimum water level manual operation: 15 mm.
Continuous duty.

Motor:
2-pole induction motor, 50 Hz (n = 2900 rpm).
DIR: three-phase 230 V ± 10%; three-phase 400 V ± 10%. Cable 5 m, without plug.
DIRM: single-phase 230 V, with float switch and thermal protector.
Incorporated capacitor. Cable 5 m, with plug CEI-UNEL 47166.
Insulation class F. Protection IP 68 (for continuous immersion)
Double impregnation humidity-proof dry winding.
Constructed in accordance with: EN 60335-2-41.

50 Hz catalogue

The post DIR 10 appeared first on Subteck.

Construction
Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port.
DIN: with two-passage impeller.
Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.

Applications
For clean and dirty water, also containing solids up to 35 mm grain size.
This construction (with smooth surfaces in rolled-stainless steel and easy access for cleaning) is also suitable for certain uses in the food industry.

Operating conditions
Liquid temperature up to 35° C.
Maximum immersion depth: 5 m.
Minimum immersion depth: 248 mm.
Continuous duty (with submerged motor).

Motor
2-pole induction motor, 50 Hz (n = 2900 rpm).
DIN: three-phase 230 V ± 10%; three-phase 400 V ± 10%;.
Cable: H07RN-F, 4G1 mm2, length 10 m, without plug.
DINM: single-phase 230 V ± 10%, with float switch and thermal protector.
Incorporated capacitor.
Cable: H07RN-F, 3G1 mm2, length 10 m, with plug CEI-UNEL 47166.
Insulation class F. Protection IP 68 (for continuous immersion)
Triple impregnation humidity-proof dry winding.
Constructed in accordance with: EN 60034-1; EN 60335-1, EN 60335-2-41.
50 Hz catalogue

The post DIN 35 appeared first on Subteck.

Construction:
Single-impeller submersible drainage pump, with vertical delivery port.
DMR: with open impeller.
Double mechanical shaft seal with interposed oil chamber, to protect against dry-running.

Applications:
For clean water containing solids up to 10 mm grain size.
For draining rooms or or emptying tanks.
Extraction of water from ponds, streams or pits and for rainwater collection.
For irrigation purposes.

Operating conditions:
Liquid temperature up to 35° C.
Maximum immersion depth: 5 m.
Minimum immersion depth: 205 mm.
Continuous duty (with submerged motor).

Motor:
2-pole induction motor, 50 Hz (n = 2900 rpm).
DMR: three-phase 230 V ± 10%; three-phase 400 V ± 10%;.
Cable: H07RN-F, 4G1 mm2, length 10 m, without plug.
DMRM: single-phase 230 V ± 10%, with float switch and thermal protector.
Incorporated capacitor.
Cable: H07RN-F, 3G1 mm2, length 10 m, with plug CEI-UNEL 47166.
Insulation class F. Protection IP 68 (for continuous immersion)
Triple impregnation humidity-proof dry winding.
Constructed in accordance with: EN 60034-1; EN 60335-1, EN 60335-2-41.

50 Hz catalogue

The post DMR 10 appeared first on Subteck.

Applications:
For clean or slightly dirty water, containing solids up to 25 mm grain size.
Particularly suitable for liquids with a high solid content.
For outdoor use a power supply cable of not less than 10 m should be used in accordance with: EN 60 335-2-41.

Operating conditions:
Liquid temperature up to 50° C.
Maximum immersion depth: 5 m.
Minimum water level with float: 130 mm.
Minimum water level manual operation: 30 mm.
Continuous duty.

Motor:
2-pole induction motor, 50 Hz (n = 2900 rpm).
DIV: three-phase 230 V ± 10%; three-phase 400 V ± 10%. Cable 5 m, without plug.
DIVM: single-phase 230 V, with float switch and thermal protector.
Incorporated capacitor. Cable 5 m, with plug CEI-UNEL 47166.
Insulation class F. Protection IP 68 (for continuous immersion)
Double impregnation humidity-proof dry winding.
Constructed in accordance with: EN 60335-2-41.

50 Hz catalogue

The post DIV 25 appeared first on Subteck.